Windows replacement Markham is an important investment project for homeowners. Homeowners should always be aware of the condition of their windows at all times. There are so many signs that tell you when you need to get your windows replaced. Regular inspection is important to help identify some of these reasons.
A specific time range is not convenient for the windows replacement project. The need to replace the windows changes from home to home depending on the signs that you can see. The following are some of the ways to identify that you need windows replacement Markham that homeowners should familiarize themselves with.
- Determine If Drafts Are Coming Through The Windows
When you are trying to identify if drafts are getting in through the windows, you should look at the windows and evaluate whether you can see any gaps or cracks.
If you can see daylight entering at a certain angle or straight line from the window is a certain indication that there is a gap or a crack in the window.
You can also conduct a draft test to help identify whether the windows allow air from the outside to the inside. This test is done by sitting near the window when the weather is cold and trying to identify if you can feel a direct cold breeze hitting you.
If you find it hard to identify where the issue originated, you should consider getting an expert to inspect your windows. Once you have identified a draft issue, you should contact a windows company for windows replacement Markham to avoid dealing with high energy bills in the long run.
- Cracked Window Calking
If, during your regular inspection, you identify the caulking in your window is cracked, it should be a cause for concern. Caulking is one of the parts of the windows that deteriorates fast.
Cracked caulking is easy to identify since you will notice broken caulk pieces, and the cracks also go unnoticed. However, cracked caulking does not require full Markham window replacement, and it is important to repair before further damage occurs.
- Malfunctioning Hardware
The hardware is very crucial when it comes to the operation of the window. Traditional windows are normally manufactured with latches, handles, and cranks that are used to aid the performance of the window.
Difficulties in performance eventually result in cracking the window frame and the caulking due to using too much energy to open and close the window. Too much energy exerts pressure on the widow, which is not good.
If you realize that the hardware makes it hard to close or open the window during operation, you may need to do full windows replacement Markham.
Malfunctioning hardware is a security threat since it allows intruders to break into your home. They also make you use a lot of energy as you try to close and open the window. A simple windows replacement project can avoid all these.
- Damaged Weather Tripping
The weather stripping on the window can become damaged over time if the window is very old. Weatherstripping is usually fixed on the movable parts of the windows, and in most cases, they get damaged due to too much friction during window operation over time.
When the weather stripping is damaged, it leaves gaps that allow air transfer between the inside and the outside and, eventually, energy losses.
Once you realize that the weather stripping is damaged, you should do a Markham window replacement for a permanent solution to avoid energy losses.
- Condensation Between The Window Panes
Condensation between the window panes happens in cases where there is a gap allowing moisture in. if the moisture is finding its way in, it also means that the krypton and argon gas used between the panes for insulation purposes is also escaping.
When the window loses insulation, it is no longer energy efficient, making your home lose value. Condensation between panes is a red flag and should be attended to with windows replacement Markham to achieve energy efficiency.
